By Morse Building Consultancy | Updated November 2026
Morse Building Consultancy (MBC) provides independent building reports, engineering assessments and detailed scopes of works for insurance claims, construction disputes and property damage across Australia.
Our licensed building consultants and registered engineers investigate the cause and extent of damage, identify relevant defects and compliance issues, and prepare factual reports supported by site evidence.
The purpose is to establish what happened, explain the technical findings and identify the repairs or further investigations required.
For insurers, loss adjusters, brokers, property owners and legal professionals, this provides a clearer basis for progressing complex claims and resolving technical disagreements.
Request a Building Report or Scope of Works
Building reports establish the technical facts. They document the condition, cause and extent of damage, relevant defects and recommended next steps.
Scopes of works translate findings into repair requirements. They identify the work needed, including relevant trades, materials, quantities and repair methods.
Causation must be supported by evidence. Independent reports distinguish damage associated with a reported event from pre-existing deterioration, maintenance issues or defective workmanship.
Detailed reporting can reduce uncertainty. Clear findings and properly defined repair requirements can help avoid repeated assessments, disputed scopes and unnecessary variations.
MBC provides national expertise. Our network includes licensed building consultants and registered engineers working across Australia, supported by more than 38 years of building industry experience from founder Andrew Morse.
A building report for an insurance claim is a technical assessment of property damage that explains what was observed, the likely cause of damage, its extent and the repairs or further investigation recommended.
These reports are particularly important when the cause of damage is uncertain, several factors may have contributed or the proposed repairs are disputed.
MBC prepares independent building reports for residential, commercial, industrial and strata properties affected by storms, hail, cyclones, floods, fire, vehicle impact, water ingress and other building-related issues.
A report may identify event-related damage alongside deterioration, construction defects, maintenance issues or earlier damage. The consultant's responsibility is to examine the available evidence and explain the findings, including any limitations.
The report provides technical information that insurers and other stakeholders can consider when making decisions. It does not determine whether an insurance policy responds.
For more information about the role of an independent consultant, read What is an Independent Building Consultant and Why Do Insurers Rely on Them?.
Every investigation is different. The content and level of detail depend on the nature of the damage, the questions requiring an opinion and the available evidence.
Depending on the instructions, an MBC building report may include:
Property and assessment details: The property, reported incident, inspection date, instructions and purpose of the assessment.
Building condition and observations: Construction characteristics, visible damage, affected building elements and relevant historical conditions.
Supporting evidence: Photographs, measurements, testing results, relevant records, drawings and other information considered.
Damage causation: Findings on the likely cause of damage, contributing factors and any plausible alternative explanations.
Event-related and pre-existing conditions: Identification of damage associated with the reported event and conditions that may have developed previously.
Building compliance: Relevant requirements under the National Construction Code (NCC), applicable legislation and Australian Standards.
Repair recommendations: Practical guidance on rectification, further investigation or specialist assessment.
Assumptions and limitations: Areas not inspected, information unavailable and matters where further evidence may be required.
Where requested, the report may also include a detailed scope of works setting out the recommended rectification.
Structural adequacy, engineered repair designs or certification may require a separate report prepared by an appropriately registered engineer.
The level of reporting should reflect the complexity of the matter. A straightforward assessment may require a concise report, while a complex loss involving multiple buildings, competing causes or significant structural concerns may require considerably more detail.
A scope of works is a document that identifies and describes the repairs or rectification required following an assessment of building damage.
It translates the technical findings into practical construction requirements that contractors can review, price and use when planning the work.
Depending on the project, a detailed scope may identify:
The building elements requiring repair or replacement.
The location and extent of the affected areas.
Relevant trades, materials and construction methods.
Measured quantities and work descriptions.
Removal, disposal and reinstatement requirements.
Access, protection and associated works.
Applicable compliance requirements.
Specialist testing, engineering or certification where needed.
A repair scope should account for the work involved in completing the repair, not simply identify the visibly damaged component.
For example, replacing a section of damaged plasterboard may also require consideration of skirting boards, cornices, architraves, insulation, adjacent finishes, services and painting.
Not every repair will require all these items. The point is that the scope must reflect the actual construction and work required at that property.
If those details are overlooked, contractors may interpret the work differently, submit quotations based on different assumptions or identify additional requirements once repairs begin.
A well-prepared scope gives insurers, contractors and property owners a clearer understanding of what has been allowed for and what remains outside the proposed works.
As Andrew Morse explains in The Devil is in the Detail, thorough investigation and properly documented repair requirements are fundamental to accurate reporting and tendering.
A building report establishes the technical findings. A scope of works sets out the repairs recommended in response to those findings.
Building report | Scope of works |
|---|---|
Investigates what happened and why | Identifies what repairs are required |
Documents condition, damage and causation | Describes repair methods, trades and materials |
Records observations, testing and evidence | Sets out work items and relevant quantities |
Identifies defects, deterioration and contributing factors | Distinguishes rectification requirements and associated works |
Provides technical conclusions and recommendations | Supports contractor quotations, tendering and repair planning |
Both documents can be useful, but they serve different purposes.
A report may establish the cause of damage without requiring a detailed repair scope. Alternatively, a complex reinstatement project may require extensive scoping after causation has been established.
Where both are commissioned, the scope should be consistent with the report's findings.
A scope of works does not automatically include a priced construction estimate. Cost assessment, quantity surveying or contractor pricing may be required separately, depending on the instructions.
MBC follows a structured investigation and reporting process, with the level of assessment determined by the nature and complexity of the matter.
Stage | What happens |
|---|---|
1. Scope and briefing | Confirm the property details, reported event, purpose of the report and technical questions requiring investigation |
2. Site inspection | Inspect the relevant building elements and document observations, damage, measurements and photographic evidence |
3. Investigation and analysis | Assess possible causes against physical evidence, construction history, relevant records and applicable technical requirements |
4. Reporting and scoping | Prepare the technical findings and, where instructed, a detailed scope of works consistent with those findings |
5. Ongoing support | Provide clarification, supplementary assessment or further technical input where required |
The process may also involve additional testing or specialist assessment.
For example, a water ingress investigation might require moisture readings and examination of waterproofing details. Suspected structural movement may require engineering assessment, while a disputed storm claim may involve examining historical building conditions and available weather information.
Our site investigation services provide further information about how MBC examines building failures, deterioration and possible causes of damage.
An independent building report should consider the evidence supporting the reported cause of damage alongside other reasonable explanations.
A building can have more than one condition affecting the same component.
For example, a roof may have genuine recent hail damage together with longstanding corrosion, previous repairs or historical impact marks.
The assessment may consider the condition of coatings, corrosion, repair history, impact patterns and other physical characteristics to help establish which damage is consistent with a recent event.
Where relevant, information from the Bureau of Meteorology can provide useful context about the reported weather event.
However, weather information does not independently prove what damage occurred at a particular building.
The consultant must consider whether the physical evidence supports the proposed cause and whether any other factors contributed.
MBC explores this issue in Can weather data prove hail damage? Why site evidence still matters in insurance claims.
A reliable building report should allow another qualified reader to understand the instructions, evidence, reasoning and conclusions without having to make assumptions about how the opinion was reached.
The Insurance Council of Australia's Expert Reports Industry Best Practice Standard provides guidance on the commissioning, preparation and use of external expert reports.
It addresses matters including relevant qualifications, objectivity, evidence, clear reasoning and the need for reports to explain their findings.
For claims professionals, important considerations include:
Does the report answer the questions asked?
The findings should address the purpose of the assessment and identify any issues that require further investigation.
Is the technical opinion supported by evidence?
Observations, photographs, measurements and relevant documentation should support the reasoning behind the conclusions.
Were alternative causes considered?
Where several explanations are plausible, the report should demonstrate how those possibilities were assessed.
Are limitations clearly identified?
The report should explain where access restrictions, missing documentation or insufficient evidence affect the certainty of an opinion.
Does the recommended scope follow the findings?
Proposed repairs should relate to the identified damage and technical requirements, with unrelated work or upgrades clearly distinguished.
The objective is not simply to produce a lengthy report. It is to provide sufficient investigation, evidence and explanation for the matter being assessed.
For further guidance, read MBC's Before an expert opinion drives the claim decision: five questions claims teams should ask.
An accurate scope of works helps establish what is being priced and the assumptions on which a repair quotation is based.
This is particularly important when several contractors are quoting for the same work.
If one contractor includes all necessary removal, access, reinstatement and finishing works while another allows only for the visibly damaged component, the quotations may not be directly comparable.
A detailed scope can help:
Establish a consistent basis for contractor quotations.
Identify repair quantities and technical requirements.
Reduce ambiguity about inclusions and exclusions.
Support more informed review of costs and variations.
Assist with repair planning and cost assessment.
Highlight potential compliance or specialist requirements before construction.
Detailed scoping cannot eliminate variations or guarantee final costs. Concealed damage, site conditions and other issues may only become apparent during the work.
However, identifying the known requirements early provides a more reliable starting point for tendering and reinstatement.
MBC discusses the commercial consequences of inadequate initial investigations in The High Cost of Cheap Reports: Why Comprehensive Assessments Streamline Dispute Resolution.
Building reports may identify construction issues or compliance requirements that affect the proposed repair methodology.
The applicable requirements depend on the building, its original construction, the nature of the work and the legislation applying in the relevant state or territory.
An older building does not automatically have to comply with every provision of the latest National Construction Code simply because it was constructed under an earlier edition.
However, proposed repairs, alterations or replacement of particular elements may trigger requirements under the applicable NCC edition and state or territory legislation.
A building report should therefore distinguish:
The requirements relevant to the original construction.
Any defects or non-compliance identified during the assessment.
The requirements that apply to the proposed repair work.
Any additional engineering, design or certification needed.
This distinction is important when the original building was constructed many years before current codes and standards.
A technical report should explain the basis for any proposed compliance upgrade rather than automatically treating an older building's condition as a reason to reject or replace an entire component.
Insurers, loss adjusters and brokers may seek an independent building report when the available information does not adequately establish causation, damage extent or repair requirements.
Common situations include:
A disputed storm, hail, flood, fire or water damage claim.
Conflicting explanations from contractors or previous experts.
A proposed repair scope that does not address the apparent cause of damage.
Concerns about defects, deterioration or previous maintenance.
Significant differences between contractor quotations.
Complex claims involving several affected buildings or construction systems.
Matters where further technical evidence may assist internal dispute resolution or consideration by the Australian Financial Complaints Authority (AFCA).
For insurance brokers, independent technical reporting can help clarify issues affecting their clients and support informed discussions with the insurer.
For insurers and claims teams, a well-supported report can help identify what information is sufficient for a decision and what further assessment may be necessary.
The technical expert does not decide whether a claim is covered. That remains the insurer's responsibility under the relevant policy.
A building report prepared by a licensed building consultant generally focuses on construction, building condition, damage causation, workmanship and practical rectification requirements.
A structural engineering report addresses structural adequacy, stability, loads, material performance and engineered repair requirements.
Engineering involvement may be necessary where there is:
Significant structural cracking or movement.
Suspected footing or foundation failure.
Damage to load-bearing walls, beams or roof framing.
Structural deformation following impact, fire or severe weather.
A requirement for engineered design, calculations or certification.
Some matters require both disciplines.
The building consultant may investigate general damage and construction conditions, while the engineer assesses structural performance and any necessary design or certification.
Read more about the difference between a building report and an engineering report or explore MBC's structural engineering reports.
MBC has provided independent building and engineering consultancy services since 2012, investigating property damage, construction defects and complex insurance matters across Australia.
Founder and Managing Director Andrew Morse has more than 38 years of building and construction experience and has personally investigated and reported on more than 2,400 matters.
The wider consultancy has assessed more than 6,000 matters.
Our approach combines practical construction knowledge with specialist investigation and reporting expertise.
Independent reporting
We investigate the evidence without a predetermined outcome or commercial interest in carrying out the associated repair work.
Practical building knowledge
Our consultants understand construction methods, materials, building performance and the work involved in rectification.
Building and engineering expertise
MBC's national network includes licensed building consultants and registered engineers, allowing specialist expertise to be engaged where required.
Insurance industry experience
Our reporting supports the technical information needs of insurers, loss adjusters, brokers and other property stakeholders.
Professional involvement
MBC is a Corporate Founding Member of the Association of Insurance Building and Engineering Consultants (AiBEC). Andrew Morse has also contributed to initiatives relating to the quality of expert reporting.
Learn more about Andrew Morse's experience and approach to building investigations.
A builder's report is a commonly used term for a technical assessment of building damage prepared by a building professional.
Depending on the appointment, it may describe damage, assess likely causes and recommend repairs.
A report prepared by an independent building consultant differs from a repair quotation because its primary purpose is to investigate and report technical findings rather than price or carry out the construction work.
No. The content of a report depends on the instructions.
Some assessments are limited to damage causation or building condition. Others require a detailed scope of works suitable for repair planning or tendering.
MBC can advise on the appropriate reporting requirements after reviewing the nature of the matter.
No. A scope of works describes the repairs required, including relevant materials, trades, methods and quantities.
A repair quotation provides pricing for carrying out the work.
A detailed scope can be used as the basis for contractor quotations, while independent cost assessment or quantity surveying may be required separately.
A building report can help identify why quotations differ by clarifying the damage, proposed repair methodology and necessary work items.
Where the disagreement involves causation or repair extent, further inspection or technical analysis may be required.
The resulting report can provide a common technical basis for reviewing the quotations, although agreement between parties is not guaranteed.
Yes, where sufficient evidence is available.
The consultant considers physical damage patterns, material condition, building history, weather information, earlier repairs and other relevant evidence.
Where several contributing causes are present, the report should address those factors rather than attribute all damage to one event.
Relevant Australian Standards and the NCC should be considered where they apply to the technical questions or proposed work.
Not every report requires extensive standards references.
Any standard relied upon should be relevant to the building, the work and the applicable regulatory requirements.
Yes. An independent building report may provide technical evidence relevant to internal dispute resolution, AFCA complaints, mediation or legal proceedings.
The usefulness of the report depends on the issues in dispute, the qualifications of the author and the evidence supporting the opinion.
Reports prepared specifically for legal proceedings may need to satisfy additional expert witness requirements.
The timeframe depends on the complexity of the matter, location, accessibility, available documentation and required investigations.
A relatively straightforward claim may require one inspection. A complex loss involving several causes, buildings or engineering disciplines may require additional site visits and analysis.
MBC can provide an indicative timeframe after reviewing the instructions.
The cost depends on the property, nature of the damage, investigation requirements, specialist expertise and level of reporting requested.
A detailed scope of works, specialist testing or engineering input may require additional work.
MBC can prepare a quotation once the purpose and scope of the assessment are established.
Yes. MBC operates across all Australian states and territories, including regional and remote locations.
Timing and availability depend on the location, required expertise, travel arrangements and consultant capacity.
Morse Building Consultancy provides independent technical reporting for insurers, brokers, loss adjusters, property owners, strata managers and legal professionals.
If you need an assessment of property damage, a detailed repair scope or further technical evidence for a disputed claim, contact our team to discuss the appropriate service.
Contact Morse Building Consultancy to request an assessment.
Phone: 1300 066 773