By Morse Building Consultancy · Updated 26 October 2026
When structural integrity is in doubt, independent, evidence-based assessment is essential.
Morse Building Consultancy delivers impartial structural investigations across Australia. We give insurers, loss adjusters, brokers, and property owners the clarity to act. By finding the root cause of structural problems and measuring their impact, we provide detailed guidance backed by structural building reports that stand up to scrutiny.
A structural investigation is an on-site, evidence-based assessment that identifies how a building's structure is performing and why problems have appeared.
A structural building report refers to an independent document recording observed defects, likely causes, and practical next steps — it differs from a structural engineer report, which involves formal calculations and certification.
Common issues investigated include foundation settlement, wall cracking, roof frame damage, concrete spalling, steel corrosion, and event-related damage from storms, fires, or impacts.
According to the Australian Building Codes Board, all findings and remediation advice should align with the National Construction Code (NCC) and relevant Australian Standards.
Morse Building Consultancy operates in all Australian states and territories, pairing licensed building consultants with registered structural engineers.
A structural investigation is an instrumented, on-site assessment that explains how a building's structure is performing, why issues have emerged, and what steps are needed to fix them. It goes beyond a visual check to include material testing, load-path analysis, and code-compliance review. Our structural investigation and assessment offering covers five core service areas:
On-site Structural Inspections
Thorough exams of buildings and structures to evaluate condition and stability. These inspections record cracking patterns, deflections, and movement using calibrated instruments.
Forensic Structural Investigations
In-depth analysis of structural failures, defects, or damage to pinpoint root causes. Examples include design flaws, material fatigue, and foundation movement. According to Standards Australia, forensic analysis should follow AS 3600 (concrete) or AS 4100 (steel) where relevant.
Post-Event Structural Assessments
Rapid assessment of damage after storms, fires, floods, or impacts. These assessments separate new structural damage from pre-existing issues.
Structural Condition Reports
Unbiased structural building reports with clear findings, photographic evidence, and code-compliance notes. These reports are suitable for insurance claims or remediation planning.
Remediation Scopes and Advice
Recommendations for repair or stabilisation, including scope of works or engineering advice to restore structural integrity when within the assessment scope.
The most common structural issues include foundation settlement, wall cracking, roof frame failures, concrete deterioration, and damage from extreme weather events. We investigate and report on problems found in residential, commercial, and industrial properties:
Foundation settlement, subsidence, and excessive building movement
Cracking in walls, slabs, or structural elements and their underlying causes
Roof frame damage, truss failures, or beam deflection
Concrete deterioration (spalling), steel corrosion, or timber rot affecting structural integrity
Water ingress and moisture damage compromising structural components
Structural damage from extreme weather, fire, impact, or other sudden events
By assessing these issues, we help tell apart normal wear-and-tear, maintenance-related problems, and significant structural defects or event-related damage. For instance, according to the Geoscience Australia natural hazards program, Australian properties face rising exposure to cyclone, flood, and bushfire events — making post-event structural assessment increasingly important.
The process follows five clear steps, from initial briefing through to ongoing support. Each stage builds on the last to ensure thorough, defensible results.
Morse Building Consultancy — Structural Investigation Process | |
|---|---|
Step | What Happens |
1. Scope and Briefing | We define the investigation's objectives, review background documents, and agree on the site-access plan with the client. |
2. Site Inspection | Our consultants visit the property, carry out visual and instrument-based checks, and record all observations with photos and measurements. |
3. Investigation and Analysis | Data from the site is analysed against design drawings, Australian Standards, and the National Construction Code to identify root causes. |
4. Reporting | Findings are compiled into a detailed structural building report with photographic evidence, causation analysis, and remediation options. |
5. Ongoing Support | We remain available for follow-up questions, scope refinements, and additional inspections if conditions change. |
You should request a structural assessment whenever there is visible movement, major cracking, suspected failure from an impact or storm, or when a building's stability is uncertain. Our structural assessments help manage risk, guide repair strategies, and ensure that decisions — whether tied to an insurance claim, maintenance, or safety — rest on accurate, defensible information. As a result, structural assessments are valuable to insurers, loss adjusters, brokers, property managers, and owners alike.
Don't leave structural issues to chance. Contact us today to discuss a professional structural investigation or request a structural assessment.
A structural building report refers to an independent, evidence-based document that records the condition of a building's key structural elements. It covers footings, slabs, walls, beams, framing, and other load-bearing parts. The report documents observed issues, explains likely causes, and sets out practical next steps so owners, insurers, and property stakeholders can make informed decisions about safety, remediation, compliance, or claims.
However, a structural building report is different from a structural engineer report. Where the matter requires structural calculations, certification, engineered design, or a formal opinion on structural adequacy, a registered structural engineer may be required. According to the Engineers Australia guidelines, only registered engineers should provide formal load-capacity certifications.
In summary, a structural building report:
Records observed defects or movement, outlines likely causes, and supports findings with site observations, photographs, and relevant compliance references.
Helps owners, insurers, brokers, and property stakeholders decide on safety, repairs, remediation scope, claim pathways, and next steps.
Morse Building Consultancy provides independent, evidence-based structural investigation services that separate event-related damage from pre-existing conditions and give you a clear path to remediation. Specifically, the consultancy:
Delivers objective structural assessments and structural building reports suitable for claim, compliance, or legal use.
Pairs licensed building consultants with registered structural engineers who bring decades of practical experience.
Provides clear, detailed documentation of causation, extent of damage, and risk to support confident decisions.
Operates across all Australian states and territories, providing consistent quality wherever the property is located.
Aligns findings and recommendations with the National Construction Code, the Building Code of Australia, and relevant Australian Standards.
"When structural integrity is in question, the quality of your investigation and assessment matters. Our role is to give stakeholders the facts: clear, defensible, and aligned with the code."— Andrew Morse, Managing Director
The following case study shows how a structural investigation resolved uncertainty in a mixed-age strata complex with podium planters over a basement.
The Challenge: In mixed-age strata complexes or buildings with podium planters over basements, structural uncertainty can escalate quickly. When a carpark slab starts to dish or water ingress causes cracking at transfer slabs, strata committees and property managers need facts — not guesswork.
The Action: Morse Building Consultancy was engaged to perform a comprehensive structural investigation. Rather than looking only at the surface, the team assessed load paths, checked reinforcement cover for corrosion, and distinguished thermal or shrinkage movement from genuine structural distress.
The Outcome: The findings were compiled into an audit-ready structural building report. By definitively separating event-related damage from long-term moisture or pre-existing defects, the report provided a buildable, quantified rectification pathway. As a result, the owners' corporation could confidently brief contractors and the insurer could fairly apportion loss.
Read the full strata structural investigation case study
A structural investigation is an instrumented, on-site assessment that explains how a building's structure is performing, why issues have emerged, and provides practical, code-compliant remediation steps.
Assessments are required when there is visible movement in slabs or retaining walls, major cracking, suspected structural failure from impacts or storms, or when complex NCC compliance verification is needed.
It uncovers movement and cracking patterns, verifies load paths and restraints, assesses water and corrosion effects on reinforcement, and clearly separates fresh event damage from pre-existing structural distress.
Standard inspections are often visual and general. In contrast, structural investigations go much deeper. They include calculations, material testing, load-capacity analysis, and engineering safety review aligned with the NCC and Australian Standards.
Licensed building consultants can investigate construction issues and causation. However, registered engineers are required when structural adequacy, legal certification, or formal load calculations are needed. According to Engineers Australia, only registered professionals should certify structural adequacy.
Yes. Where appropriate, non-destructive testing (NDT) — a type of evaluation that detects internal defects without damaging the building — is used. Common NDT methods include ground-penetrating radar and ultrasonic testing.
Regular structural health checks on aging buildings catch issues like concrete cancer (chloride-induced corrosion of embedded steel) and surface spalling early. This allows strata committees to budget for repairs ahead of time and reduces the risk of surprise major-loss claims.
Insurers rely on structural building reports to definitively apportion loss, separate genuine storm or impact damage from long-term wear, and establish an NCC-compliant repair scope that prevents future liability.
Most site inspections are completed within one to two days, depending on the building's size and complexity. The full report — including analysis and documentation — is usually delivered within two to three weeks of the inspection.
Yes. Morse Building Consultancy prepares structural building reports with clear, evidence-based findings designed to withstand legal scrutiny. When expert testimony is needed, the consultancy's team can also provide court-ready witness services.
Settlement refers to the gradual, often uniform sinking of a building as soil compresses under load — typically occurring in the first few years after construction. Subsidence refers to downward ground movement unrelated to the building's load, often caused by reactive clay soils, tree roots, or groundwater changes. Structural investigations distinguish between the two because each requires a different remediation approach.